In Stock

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Have a Question? Ask a Specialist

+353 87 757 2993

Quick Comparison

SettingsBAR AND CHAIN 400MM removeProfessional Abrasives Flap Discs remove9" Segmented Diamond Disc removeAir Nailer & Stapler remove150MM ROTARY WIRE BRUSH remove25 Discs / Disques Discos remove
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

  • 10pcs high quality abrasives flap discs
  • Diameter: 115mm (4 1/2")
  • Bore Size: 22.2mm
  • Maximum Safe Speed: 13280 R.P.M. /80M/S
  • All flap discs are fragile. They should be handled with care.
  • Flap discs should be stored on a flat, rigid surface, avoiding damp and frost or wide variation in temperature.
  • Use the oldest discs (on" first in, first out" basis).
  • Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.
  • Ensure that no other person is at risk, especially near the machine while working.
  • Case Quantity 25 ** No Inners
  • Size : 230 X 7 X 2.6 X 22.23
  • Maximum Operating Speed: 6,600Rpm, 80M/S
  • Mpa Certificate: 20812
  • Flat Centre
  • Not Suitable For Metal
  • Suitable For Cutting Most Building Materials Including Concrete, Paving Slabs, Concrete Pipes, Clay Roof Tiles And House Bricks
  • For Use On 230Mm Angle Grinders
  • Model : SF 5040
  • Weight (without fasteners) : 1.5kgs
  • Air Inlet : 1/4NPT


Maximum permissible pressure : 8.3bar

Operating pressure range : 4~7bar

Noise characteristic : 82db

Recommended Lubricant : Air Tool Oil

Suitable Fasteners Brads : (18Ga) 10-50mm

Staples : (Crown : 5.7mm, 18Ga) 16-40mm

  • Maximum Capacity : 100pcs
  • 150mm Twist Knot Wire Cup Brush
  • M14 x 2 Internal Thread
  • Max. Speed : 4500rpm
  • For use with Angle Grinders.
  • Ideal for stripping and cleaning large metal areas.
  • DO CHECK all wheels for cracks or damage before mounting. DO make sure the operating speed of the Machine does not exceed the rated wheel speed
  • DO always handle and store wheels in a careful manner. DO be sure wheel hole fits machines arbor properly and the flanges are clean, flat, and the proper type and size for the wheel you are mounting.
  • DO always run wheel in a protected area at least one minute before grinding.
  • DO use wheel guard furnished with machine.
  • DO always wear protective safety glassed or proper face shield.
  • Selected reinforce net always bring you MAX safety cutting
  • Stainless Steel central ring protect disc well and won't get rusty even stock long time
  • Innovative mixed abrasives grain and extra thin thickness bring you whole new cutting experiences
Additional information